Skip to content

Free calculator

Jewelry pricing calculator

Enter the metal weight and what you paid per gram, then your stones, findings, packaging and time. Get the true cost of one piece, a wholesale price for shops, a retail price and what a rise in metal prices would do to your margin.

Updated

g
$

Use what you paid for the wire, sheet or grain, divided by its weight in grams. Leave both blank for pieces with no metal.

$
$
%
$

The waste allowance is added to metal, stones and findings for offcuts, scrap and breakage.

min
$
$

Time and overhead are per piece. Overhead is your monthly running costs divided by the pieces you make in a month.

×
×

Wholesale = cost × multiplier. Retail = wholesale × multiplier.

%

See what happens to your cost and margin if metal goes up.

Retail price

$168.00

Wholesale price $84.00, cost $42.00

MetalWeight × price per gram
$10.00
Materials per pieceIncludes $1.80 waste allowance and packaging
$21.00
LaborTime × hourly rate
$18.00
Cost per pieceMaterials + labor + overhead. Metal is 26.2% of it
$42.00
Wholesale price50% margin, $42.00 profit
$84.00
Selling direct at retailProfit per piece, 75% margin
$126.00
If metal rises 10%New cost. Same wholesale price: 48.7% margin. Same multiplier: $86.20 wholesale
$43.10

Calculations run in your browser. Nothing you enter is sent or stored.

How the calculator works

  1. Metal: the weight of metal in one finished piece, in grams, times what you paid per gram.
  2. Stones and findings: beads, stones and pearls, then clasps, jump rings, ear wires and chain.
  3. Waste allowance: a percentage added to metal, stones and findings for offcuts, filings, scrap and breakage.
  4. Packaging: the box, pouch, card and bag each piece goes out in.
  5. Labor and overhead: your hands-on minutes per piece at your hourly rate, plus a share of your monthly running costs.
  6. Prices: cost × a wholesale multiplier, then wholesale × a retail multiplier.
  7. Metal price test: the cost and margin if your metal price goes up by the percentage you enter.

Change any input and every figure updates.

The jewelry pricing formula

FigureFormula
MetalGrams × price per gram
Materials(Metal + stones + findings) × (1 + waste allowance) + packaging
Labor(Minutes ÷ 60) × hourly rate
Cost per pieceMaterials + labor + overhead
Wholesale priceCost per piece × wholesale multiplier
Retail priceWholesale price × retail multiplier

Example: a silver ring uses 8 g of metal that cost you $1.25 a gram, $5.00 of stones and $3.00 of findings. These are example figures, not current metal prices.

  • Metal: 8 × $1.25 = $10.00
  • Metal, stones and findings: $18.00, plus a 10% waste allowance of $1.80
  • Packaging $1.20, so materials come to $21.00
  • Labor: 45 minutes at $24.00 an hour = $18.00. Overhead: $3.00
  • Cost per piece: $42.00
  • Wholesale price: $42.00 × 2 = $84.00, a 50% margin and $42.00 profit per piece
  • Retail price: $84.00 × 2 = $168.00

If metal goes up 10%, the cost rises to $43.10. Keep the $84.00 wholesale price and your margin falls to about 48.7%. Keep the multiplier and the wholesale price becomes $86.20.

Work out your metal cost per gram

Use what you actually paid, not a price you saw quoted. Divide what you paid for the wire, sheet or casting grain by its weight in grams. Precious metal prices are usually quoted per troy ounce, and one troy ounce is about 31.1 grams, so divide a price per troy ounce by 31.1035 to get a price per gram. Metal prices move, so update this figure each time you buy stock and check your prices against it.

To find the metal weight, weigh a finished piece without stones on a jewelry scale, or weigh the wire or sheet you cut for it.

Pay yourself for your time

Time a whole batch, from cutting and soldering to setting, polishing, photographing and packing, then divide by the number of pieces. Leave your hourly rate and overhead at zero and the example drops to a $21.00 cost, a $42.00 wholesale price and an $84.00 retail price. That only covers materials, and the profit you see is really your unpaid wage.

Common mistakes

  • Pricing metal from an old purchase after prices have risen.
  • Forgetting solder, polishing compound, jump rings and the chain that comes with a pendant. Add small supplies to findings or overhead.
  • Leaving out scrap and failed pieces. The waste allowance covers them.
  • Setting a retail price that leaves no room for a shop to buy at wholesale.
  • Using a materials multiple alone, such as 3 × materials, which can leave labor and overhead unpaid on simple pieces.

Next steps

Making other products too? The handmade pricing calculator works for any item. If you know your cost and want a target margin, use the wholesale price calculator or the retail price calculator. Then put your collection and prices in front of stores with a jewelry line sheet template, made in our line sheet maker, or a simpler jewelry price list template.

FAQ

Jewelry pricing calculator FAQ

How do I work out the cost of a piece of jewelry?

Add the metal, stones, findings and packaging for one piece, with a small allowance for waste, then add your labor and a share of your overhead. In the example, $21.00 of materials, $18.00 of labor and $3.00 of overhead give a $42.00 cost per piece.

How much should I charge for handmade jewelry?

A common starting point is to double your full cost for wholesale and double the wholesale price for retail. A $42.00 cost gives an $84.00 wholesale price and a $168.00 retail price. Check the result against what similar pieces sell for in the shops you want to sell to.

How do I price jewelry when metal prices change?

Base your metal cost on what you paid for your current stock, and update it each time you buy. Use the metal price test in the calculator to see how much a rise would cut your margin, and review your prices when it gets too thin.

How do I convert a price per troy ounce to a price per gram?

Divide the price per troy ounce by 31.1035, the number of grams in one troy ounce. Where you can, use the price per gram you paid for your own stock instead.

What should the waste allowance be?

Many makers add around 10% to materials for offcuts, filings and breakage. Track what you really lose over a few batches and use that figure instead.

Turn your prices into a price list

Add your products with wholesale and retail prices and download a clean, category-grouped PDF, or share a link.